APC 990-2233A Storage, Maintenance, Transport, and Service, To Install a Replacement Battery

Page 12

Storage, Maintenance, Transport, and Service

Storage, Maintenance, Transport, and Service

Storage

Store the UPS covered in a cool, dry location with the battery(s) fully charged. At 5° to 113° F (–15° to 45° C), charge the UPS battery every six months.

To Install a Replacement Battery

This UPS has an easy-to-replace, hot-swappable battery module. Replacement is a safe procedure, isolated from electrical hazards. You may leave the UPS and connected equipment on during the replacement procedure. See your dealer or contact APC at the Web site, www.apc.com for information on replacement battery modules.

The battery replacement procedure must include replacing all battery modules in the UPS and connected external battery pack(s).

1.Remove all battery modules in the UPS.

a.Remove the front bezel  and screws .

b.Pull down the battery cover  and disconnect the top battery .

Once the batteries are disconnected, the connected equipment is not protected from power outages.

c.Remove the top battery module .

d.Remove the bottom battery module .

2.Recycle old batteries.

Be sure to deliver the spent batteries  to a recycling facility or ship to APC in the replacement battery packing material.

Pb Pb

12

Smart-UPS RT 2400/3000 VA Tower/Rack-Mount UPS User Manual

Image 12
Contents APC Smart-UPS Page Introduction/Before Installation Contact Information Safety InformationUnpacking and Equipment Placement About this ManualInstallation To Install the UPS in a RackTo Install the UPS in a Tower Configuration To Install the UPS with External Battery PacksConnectors Type Description If Required, Connect the Emergency Power Off EPO Feature Connect the Battery and Install the Front BezelConnect Power and Start Up the UPS Terminal Mode Configuration For Additional Computer System SecurityDisplay Panel Indicators OperationDisplay Panel On Battery Operation Display Panel FunctionsUtility Voltage Measurement Configuration Settings UPS ID UpsidenFunction Factory User Selectable Description Default Choices Storage, Maintenance, Transport, and Service To Install a Replacement BatteryStorage Storage, Maintenance, Transport, and Service Transporting the UPS to Another Location Troubleshooting ServiceUPS is not providing expected backup time There is no utility power Radio Frequency Warning Regulatory ApprovalsLimited Warranty Copyright Notice