APC SUA2200/3000 VA 120/230 VAC manual Introduction, About this UPS, Accessories, Unpack

Page 3

Introduction

Introduction

About this UPS

The APC Uninterruptible Power Supply (UPS) provides protection for electronic equipment from utility power blackouts, brownouts, sags and surges. The UPS filters small utility line fluctuations and isolates electronic equipment from large disturbances by internally disconnecting from utility line power. The UPS provides continuous power from the batteries until utility power returns to safe levels or the batteries are fully discharged.

Accessories

This UPS is equipped with an accessory SmartSlot. Refer to the APC Web site, www.apc.com for available accessories.

If a standard accessory, such as a Network Management Card is installed on this UPS, refer to the accessory user manual or CD for installation and operation instructions.

Install accessories prior to connecting power to the UPS.

Unpack

Read the Safety Guide before installing the UPS.

Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.

The packaging is recyclable; save it for reuse or dispose of it properly.

Check the package contents:

• UPS

• Rail kit

 

 

• Front bezel

• EPO connectors

 

 

 

 

 

 

120 V Models Only:

 

100/200 V Models Only:

230 V Models Only:

UPS literature kit contents:

UPS literature kit contents:

UPS literature kit contents:

• Two rack-mount brackets

• Two rack-mount brackets

• Two rack-mount brackets

• Four cage nuts

 

• Four cage nuts

• Four cage nuts

• Eight flathead screws

 

• Eight flathead screws

• Eight flathead screws

• Product documentation

• Product documentation

• Product documentation

Smart-UPS® User Manuals CD

• Serial communication cable

Smart-UPS® User Manuals CD

• PowerChute® Business Edition CD

• Safety information

• PowerChute® Business Edition CD

• Serial and USB communication cable

• Warranty information

• Serial and USB communication cable

• Safety information

 

 

• Safety information

• Warranty information

 

 

• Warranty information

 

 

 

• Input power cord

 

 

 

• Alternate input power cord

 

 

 

(UK customers)

 

 

 

• Utility connector plug

 

 

 

• IEC jumper cables

 

 

 

 

NOTE: The model and serial numbers are located on a small, rear panel label. For some models, an additional label is located on the chassis under the front bezel.

Smart-UPS XL 3U Rack Mount 2200/3000 VA 120/230 Vac; 3000 VA 100/200 Vac User Manual

3

Image 3
Contents Smart-UPSXL Page About this UPS AccessoriesRead the Safety Guide before installing the UPS IntroductionSpecifications Installation Install the Rails in the RackInstall the UPS in the Rack and Connect the Battery Module Rear Panels Rear Panel FeaturesStart the UPS Start-up and OperationDisplay Panel Indicators and Function Buttons Indicator Indicator Title DescriptionDisplay Panels Feature Feature Title Function Button UPS settings ConfigurationFunction Factory User Selectable Description Default Choices Connect the Emergency Power Off option User Name apc Password apc Configure UPS parametersPress 2 and Enter to change Battery Settings Press 3 and Enter to select ConfigurationReplacing the Battery Module Maintenance, Transport, and ServiceProblem and/or Possible Cause Solution TroubleshootingProblem and/or Possible Cause Solution There is no utility power 100/200 V models Regulatory and Warranty InformationRegulatory Agency Approvals and Radio Frequency Warnings FCC Compliance Notice ModelsTerms of warranty Two-YearLimited WarrantyDate of product declaration APC Worldwide Customer Support