Installation
Rear Panels
2200/3000 VA 120 Vac 3000 VA 100 Vac
3000 VA 200 Vac
2200/3000 VA 230 Vac
TV S S |
G ND |
Rear Panel Features
|
| The UPS features a TVSS screw located on the rear panel for connecting the ground leads on |
|
| transient voltage devices. |
|
| The UPS is equipped with an external battery connector located on the rear panel of the unit. |
|
| Where appropriate use an APC extension battery cable. For ordering details contact your dealer or |
|
| APC through the Web site www.apc.com. |
|
| 120 V models only: The UPS is equipped with a Site Wiring Fault LED located on the rear panel of |
|
| the unit. The LED will be illuminated if the UPS is plugged into an improperly wired utility power |
|
| outlet, (see Troubleshooting in this manual). |
|
| USB and Serial connectors are communication ports. |
|
| Use only an APC approved cable to connect to the serial port. A standard serial interface cable |
USB | Serial | is incompatible with the UPS. |
Serial and USB ports cannot be used simultaneously. USB has priority over Serial. |
The UPS has a SmartSlot located on the rear panel for adding optional accessories to the unit.
100/120/200 V model circuit breaker and line cord connection.
230 V model circuit breaker and line cord connection.
The UPS is equipped with an emergency power off feature located on the rear panel of the unit.
6 |