APC SUA2200/3000 VA 120/230 VAC manual Installation, Install the Rails in the Rack

Page 5

Installation

Installation

Your UPS model may vary in appearance from the examples depicted in this manual.

The UPS and the battery modules are heavy. Remove the battery modules to lighten the UPS during installation.

Install the Rails in the Rack

This UPS is intended for installation in a 19” rack.

For details on rail installation refer to the instructions in the rail kit.

Install the UPS in the Rack and Connect the Battery Module

Install the UPS at or near the bottom of the rack.

%

4x

4x

!

"

$

&

#

Smart-UPS XL 3U Rack Mount 2200/3000 VA 120/230 Vac; 3000 VA 100/200 Vac User Manual

5

Image 5

Contents Smart-UPSXL Page Read the Safety Guide before installing the UPS AccessoriesIntroduction About this UPSSpecifications Install the UPS in the Rack and Connect the Battery Module InstallationInstall the Rails in the Rack Rear Panels Rear Panel FeaturesStart the UPS Start-up and OperationDisplay Panels Display Panel Indicators and Function ButtonsIndicator Indicator Title Description Feature Feature Title Function Button UPS settings ConfigurationFunction Factory User Selectable Description Default Choices Connect the Emergency Power Off option User Name apc Password apc Configure UPS parametersPress 2 and Enter to change Battery Settings Press 3 and Enter to select ConfigurationReplacing the Battery Module Maintenance, Transport, and ServiceProblem and/or Possible Cause Solution TroubleshootingProblem and/or Possible Cause Solution There is no utility power Regulatory Agency Approvals and Radio Frequency Warnings Regulatory and Warranty InformationFCC Compliance Notice Models 100/200 V modelsTerms of warranty Two-YearLimited WarrantyDate of product declaration APC Worldwide Customer Support