American Power Conversion 1000 VA user manual User Configurable Items, UPS ID Upsiden

4:USER CONFIGURABLE ITEMS

NOTE: SETTINGS ARE ADJUSTED THROUGH POWERCHUTE SOFTWARE

FUNCTION	FACTORY		USER SELECTABLE	DESCRIPTION
	DEFAULT		CHOICES
Self-Test	Every 14 days		Every 7 days	Set the interval at which the UPS will
	(336 hours)		(168 hours),	execute a self-test.
			Every 14 days
			(336 hours),
			On Startup Only,
			No Self-Test
UPS ID	UPS_IDEN		Up to eight charac-	Uniquely identify the UPS, (i.e. server
			ters (alphanumeric)	name or location) for network man-
				agement purposes.
Date of Last	Manufacture Date		mm/dd/yy	Reset this date when you replace the
Battery				battery module.
Replacement
Minimum Capacity	0 percent		0, 15, 50, 90 percent	Specify the percentage to which batter-
Before Return from				ies will be charged following a low-
Shutdown				battery shutdown before powering
				connected equipment.
Voltage Sensitivity	High		High sensitivity,	Note: In situations of poor power qual-
The UPS detects			Medium sensitivity,	ity, the UPS may frequently transfer to
			Low sensitivity	battery operation. If the connected
and reacts to line
				equipment can operate normally under
voltage distortions
				such conditions, reduce the sensitivity
by transferring to
				setting to conserve battery capacity
battery operation to
				and service life.
protect connected
equipment.
Alarm Delay After	5 seconds		5 second delay,	Set the delay to avoid alarms for minor
Line Fail			30 second delay,	power glitches.
			At low battery
			condition,
			No alarm
Shutdown Delay	60 seconds	60, 180, 300, 600		Set the interval between the time when
			seconds	the UPS receives a shutdown com-
				mand and the actual shutdown.

7