American Power Conversion 1000 VA Function Factory User Selectable Description Default Choices

NOTE: SETTINGS ARE ADJUSTED THROUGH POWERCHUTE SOFTWARE

FUNCTION	FACTORY		USER SELECTABLE	DESCRIPTION
	DEFAULT		CHOICES
Low Battery	2 minutes		2, 5, 7, 10 minutes	The UPS will beep when 2 minutes of
Warning	PowerChute		(Times are approxi-	battery runtime remains.
	Business Edition		mate.)	Change the low battery warning inter-
	software provides			val setting to the time that the operat-
	automatic, unat-			ing system or system software requires
	tended shutdown			to safely shut down.
	when approxi-
	mately 2 minutes
	of battery oper-
	ated runtime re-
	mains.
Synchronized	0 seconds		0, 15, 45, 75 seconds	Specify the time the UPS will wait
Turn-on Delay				after the return of utility power before
				turn-on (to avoid branch circuit over-
				load).
High Transfer	127 Vac	127, 130, 133, 136		Set the high transfer point higher to
Point			Vac	avoid unnecessary battery usage when
				the utility voltage is usually high and
				the connected equipment is specified
				to operate with input voltages this
				high.
Low Transfer Point	106 Vac	97, 100, 103, 106		Set the low transfer point lower when
			Vac	the utility voltage is usually low and
				the connected equipment is specified
				to operate with input voltages this low.

8