APC 2200XLT, 3000T, 5000T, 1400XLT user manual Battery Replacement Procedure Tower Units

Page 18

5000 VA

1400-3000 VA

5000 VA

1400-3000 VA

5000 VA

Battery Replacement Procedure - Tower Units

1.Grasp the top edge of the bottom front cover and tilt it out.

For the 5000 VA unit: Remove the front bezel by grasping the finger clips on the side of the bezel and carefully loosening the four (4) snaps. Skip to step 3.

2.Unhook the bottom section of the front cover from the chassis and set it aside.

3.Use a screwdriver or a coin to remove the two (2) battery door screws and open the door.

4.Disconnect the front battery pack:

For the 1400 – 3000 VA models, gently but firmly pull the red and black wires at the top of the battery housing to disconnect the gray connector plug from the UPS.

For the 5000 VA model, grip the white cord on the front set of batteries and pull firmly to disconnect the connector.

5.Pull the front battery out of the UPS by pulling on the clear label, not the white cord. Remove the foam spacer and set it aside. (The 5000 VA unit does not use foam spacers.)

Notes:

Be careful removing the batteries - they are heavy. Support the bottom of the batteries as you

remove them.

The 5000 VA model has four of batteries, two in each compartment. Exercise special care when

removing the top set.

6.Disconnect and remove the second battery pack by repeating steps 4 and 5.

7.Replace the back battery (or set). For 5000 VA units:

Hold the battery pack so that the leads are on top. Slide the battery pack into the UPS.

8.Reconnect the battery (or set.)

For 1400 – 3000 VA units: Press the gray connector into the plug at the top of the battery housing. Replace the foam spacer (if used). Replace the front battery (or set) into the UPS and reconnect.

For 5000 VA units:

Press the gray connector into the plug at the top of the battery compartment. Tuck the white cord (that serves as a handle for the connector) neatly to the side.

Notes:

For the 5000 VA model, repeat steps 4 through 8 for the second set of battery packs.

Small sparks at the battery connectors are normal during connection.

9.Close the battery door, replace the screws, and replace the lower front cover or bezel.

Batteries must be recycled. Deliver the battery to an appropriate recycling facility or ship it to the supplier in the new battery’s packing material. See the new battery instructions for more information.

990-7031D, Revision 5 5/01

12

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 990-7031D, Revision 5 5/01 990-7031D, Revision 5 5/01 Handling Safety Electrical SafetyReplacement and Recycling of Batteries 990-7031D, Revision 5 5/01 Table of Contents Page Installation IntroductionUnpacking Placement Installing Rack Mount UnitsFront Load the UPS into the Rack Rack Mount OptionsConnect the Batteries Tower Units3U Rack Mount Units 5U Rack Mount UnitsCharge the battery Initial StartupRear Views Operating Instructions Shutdown Mode On BatteryBattery Charge Bar Graph Replace BatteryCold Start Low BatterySmartBoost Cold start is not a normal conditionStorage Conditions Replacing the BatteryStorage Extended storageBattery Replacement Procedure Tower Units Battery Replacement Procedure 3U Rack Mount Units Battery Replacement Procedure 5U Rack Mount Units 990-7031D, Revision 5 5/01 Typical On-Battery Runtime Versus Load, in Hours User Configuration ItemsHow to Determine On-Battery Run Time Tower and 5U Models 1400VA and 2200VA Models2200 Tower and 5U Rack Mount Models 3000 & 5000 VA Models 3U Rack Mount Models 2200 & 3000 VA ModelsSpecifications 1400 VA 2200 VA 3000 VA 5000 VATroubleshooting If the UPS requires service do not return it to the dealer ServiceLimited Warranty APC Contact Information990-7031D, Revision 5 5/01 XL Installation Smart-UPS Battery ProtocolUse the Smart-UPS Battery Pack Utility Battpack Click on Configuration Click on UPS Operating ParametersStep Number Type Produced Effect Racks Rack Type Hole Type Hardware Required Hardware IncludedAppendix C Transporting Your Smart-UPS
Related manuals
Manual 40 pages 63.83 Kb

3000T, 1400XLT, 5000T, 2200XLT specifications

The APC (American Power Conversion) range of Uninterruptible Power Supplies (UPS) includes models such as the 2200XLT, 5000T, 1400XLT, and 3000T, each designed to meet different power protection needs in various environments. These models provide reliable backup power and surge protection, ensuring that electronic devices remain operational during utility power disruptions.

The APC 2200XLT is known for its robust performance and efficiency. This model features on-line double conversion technology, which guarantees that connected equipment receives pure sine wave power, crucial for sensitive electronics. With a power capacity of 2200 VA, the 2200XLT accommodates high-energy requirements, making it ideal for small to medium-sized businesses. The LCD display provides real-time status on power conditions, battery health, and load levels, ensuring users are always informed.

The APC 5000T, with a power capacity of 5000 VA, is designed for larger operations, providing substantial backup power for critical infrastructure. This model offers advanced features such as hot-swappable batteries, allowing maintenance without disrupting power to connected devices. The 5000T also includes PowerChute software, facilitating monitoring and management of UPS systems via a user-friendly interface. Its enhanced scalability means it can easily be expanded to meet growing power needs.

The APC 1400XLT is compact yet efficient, offering 1400 VA of power. It excels in providing reliable protection for desktop computers and workstations. Featuring Power Factor Correction (PFC), this model optimizes power delivery, resulting in increased energy savings. Its customizable alarm settings and easy-to-read LCD panel make it user-friendly, ensuring that even those with minimal technical expertise can operate it effectively.

Lastly, the APC 3000T serves as a versatile powerhouse for small to medium-sized data centers. Its 3000 VA capacity supports critical equipment, while redundant features enhance reliability. The unit is also equipped with a network management card for remote monitoring capabilities. The 3000T's ability to configure and manage multiple units in a parallel setup allows businesses to ensure that their power needs are met while maximizing uptime.

In summary, the APC 2200XLT, 5000T, 1400XLT, and 3000T UPS models offer a variety of features and technologies designed to ensure power availability and system reliability across various applications. These units emphasize security against power disturbances while providing a solid return on investment for organizations seeking to protect their critical electronic infrastructure.
Top Page Image Contents