Unlock | APC 60-80KW 208/480V UPS instruction

Alarms and Events

19.	Q001 off	UPS input switch position	–

20.	High temperature of isolation	Temperature of isolation input/	Check fan, check for airflow
	transformer	output transformer, too high	obstructions, check for overload

21.	High temperature of main	Temperature of static input	Check fan, check for airflow
	static switch	switch, too high	obstructions, check for overload

22.	High temperature of bypass	Temperature of static bypass	Check fan, check for airflow
	static switch	switch, too high	obstructions, check for overload

23.	Main inverter failure	Temperature of main inverter, too	Check fan, check for airflow
		high or inverter fuse blown	obstructions, check for overload,
			check fuse

24.	High temperature of delta	Temperature of delta inverter, too	Check fan, check for airflow
	inverter	high	obstructions, check for overload

25.	Low DC shutdown	Battery discharged to minimum	Ensure battery recharging
		permissible level

26.	Low DC warning	Battery nearly discharged	Save your data now

27.	Mains momentarily outside	Short disturbances on mains	–
	tolerance	supply (1 ms transients)

28.	Mains outside tolerance	Mains input voltage R.M.S. value	–
		outside tolerance

29.	Mains frequency outside	Mains input frequency outside	–
	tolerance	tolerance

30.	Bypass momentarily outside	Short disturbances on bypass	–
	tolerance	voltage

31.	Bypass outside tolerance	Bypass input voltage outside	–
		tolerance

32.	Bypass frequency outside	Bypass input frequency outside	–
	tolerance	tolerance

33.	Output momentarily outside	Short disturbance on output	If message reappears -
	tolerance	voltage (inrush current)	call for assistance

34.	Output outside tolerance	Output voltage outside tolerance	Call for assistance

35.	Output frequency outside	Output frequency outside	Call for assistance
	tolerance	tolerance

36.	High battery temperature	Battery ambient temperature too	Check system ambient
		high	temperature, check fan, check for
			airflow obstructions

37.	Battery weak	Battery capacity below 75% or	Test battery capacity
		battery MCCB/fuse switched off

38.	Battery defective	Insufficient battery capacity or	Call for assistance
		battery MCCB/fuse switched off

39.	System locked in operation	UPS has made 10 attempts within	Unlock.
	mode	1 minute to switch from bypass to	If message reappears -
		battery operation, or “High DC	call for assistance
		warning” has appeared 10-20
		times within 1 minute

990-4035

26	User Guide APC Silcon 60-80kW 208V/480V UPS

60-80KW 208/480V UPS specifications

The APC 60-80KW 208/480V Uninterruptible Power Supply (UPS) is a robust solution designed to ensure continuous power and protection for mission-critical systems and sensitive equipment in data centers and industrial environments. With its impressive capacity, this UPS provides reliable backup power, ensuring operational continuity by delivering clean and stable power to connected loads, even during power disruptions.

One of the standout features of the APC 60-80KW UPS is its dual input configuration, enabling it to operate on both 208V and 480V systems. This flexibility allows businesses to effortlessly integrate the UPS into their existing electrical infrastructure while maintaining high efficiency. The UPS’s modular design further enhances its adaptability, allowing users to scale power capacity as their business grows or adjusts to changing demands.

The system incorporates advanced technologies to optimize performance and energy efficiency. The use of high-efficiency power conversion techniques results in reduced energy consumption and lower operating costs, making this UPS an environmentally friendly choice. Additionally, it features a high power factor, which allows it to deliver more usable power to the load, reducing the total cost of ownership.

The APC 60-80KW UPS also includes an intelligent battery management system that maximizes battery life by monitoring and adjusting charging cycles. It employs a hot-swappable battery design, enabling maintenance and replacements without interrupting power to critical systems. This ensures that organizations can maintain uptime while managing their UPS effectively.

The UPS is equipped with an advanced monitoring system that provides real-time visibility into power conditions and UPS performance. An intuitive graphical display allows users to easily track key metrics, while remote management capabilities ensure that the UPS can be monitored and controlled from anywhere, enhancing operational efficiency.

Safety features are paramount in the design of the APC 60-80KW UPS. It includes robust short-circuit protection and thermal management to prevent overheating and damage. Furthermore, the unit is compliant with various industry standards, ensuring reliable operation in a variety of environments.

In conclusion, the APC 60-80KW 208/480V UPS is a reliable, efficient, and advanced solution designed to safeguard crucial infrastructure against power interruptions. Its features, including modularity, dual input configurations, and intelligent monitoring, make it an ideal choice for organizations seeking to enhance their power reliability and operational effectiveness.

Alarms and Events

Unlock.

User Guide APC Silcon 60-80kW 208V/480V UPS

60-80KW 208/480V UPS specifications