Royal Sovereign RSH-380SL Main Fuse, Main Power Wires, No Main Power, No Electricity

Page 9

7.Defective main PCB.

a. Replace the main PCB.

2.4No Main Power

CAUSES

1.No electricity.

2.Blown main fuse.

3.Disconnected main power wires.

4.Defective transformer.

MEASURES

1.No Electricity.

a.Double check to insure that you have electricity from your outlet.

b.Check the circuit breaker.

c.Double check that source of power is 220V, 15Amp, and single phase.

2.Blown main fuse.

a.Replace the main fuse located above the main power switch.

Main Fuse

3.Disconnected main power wires.

a. Check that the main power wires are properly connected.

Main Power Wires

7

Image 9

Contents MODELRSH-380SL Table of Content Safety Precautions Troubleshooting Wire-HeaterWire-HeaterRollers Not Heating Blown burnt wire fuse T/Fuse Wire-Temp. FuseConnector-Wire Sensor Wire-T / FuseRollers Over Heating Rollers Not Running No power to the unitMotor Switch is engagedNo Main Power Main Power WiresMain Fuse No ElectricityProblem Curling Transformer is defective a. Replace the transformerPoor Lamination Quality Replacing the Right Cover Replacing PartsReplacing the Sub-PCB Replacing the Main PCBReplacing the Heaters Adjusting front and rear rollers Pressure AdjustmentsPart List Front Table Safety Lever Spcc 1.5T PCB-SUB Assy Explode View VCC5V Wire DiagramConnect part Bimetal135 SUB PCBWire T/Fuse Micro Switch Wire Safety S/W Wire Motor