Royal Sovereign RSH-380SL service manual Switch is engaged, Motor

Page 8

Switch is engaged

4.Film is jammed on the rollers.

a.Un-jam the film using a combination of the pressure lever and reverse button.

5.Disconnected motor wire.

a.Check the motor wire connection with PCB.

Wire-motor

6.Defective main motor.

a. Replace the main motor.

Motor

6

Image 8

Contents MODELRSH-380SL Table of Content Safety Precautions Rollers Not Heating TroubleshootingWire-HeaterWire-Heater Wire-Temp. Fuse Blown burnt wire fuse T/FuseRollers Over Heating Connector-Wire SensorWire-T / Fuse No power to the unit Rollers Not RunningSwitch is engaged MotorMain Power Wires No Main PowerMain Fuse No ElectricityPoor Lamination Quality Problem CurlingTransformer is defective a. Replace the transformer Replacing Parts Replacing the Right CoverReplacing the Sub-PCB Replacing the Main PCBReplacing the Heaters Adjustments Adjusting front and rear rollers PressurePart List Front Table Safety Lever Spcc 1.5T PCB-SUB Assy Explode View Wire Diagram VCC5VConnect part SUB PCB Bimetal135Wire T/Fuse Micro Switch Wire Safety S/W Wire Motor