7. Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical drive.
8. Remove the optical drive bracket (2).
Reverse this procedure to reassemble and install the optical drive.
Switch cover
Description | Spare part number |
|
|
Switch cover (includes LED board and cable) | |
|
|
Before removing the switch cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
Remove the switch cover:
1. Turn the computer
2. Open the computer as far as possible.
