Spartan Operation and Maintenance Manual
6.3 Lamination pouches
INFORMATION: Treat the pouch carriers carefully as they may be reused until you see wrinkles in the lamination.
1.Turn the laminator on.
2.Center the lamination pouch between the two sheets of the pouch carrier.
Pouch carrier
Lamination pouch
6.Wait for READY to illuminate.
7.Press RUN.
+
8.Align the leading edge of the pouch carrier containing the lamination pouch and image slightly off center of the table.
3.Fold the top sheet of the pouch carrier and the lamination pouch over.
4.Center the image on the lamination pouch and carefully lay the top sheets back over the image.
Pouch carrier
Lamination pouch
Image
9.Gently slide the pouch carrier into the roller nip until you feel the rollers catch the pouch carrier.
10.As the pouch carrier nears its end, be prepared to catch the pouch carrier as it exits the rear of the laminator.
5.Set the pressure handle to the lamination position.
11.Press STOP and set the pressure handle to the roller release position.
+
© 2004 General Binding Corporation | Page |