Spartan Operation and Maintenance Manual
7.0 Maintenance
7.1 Cabinets, cover and stand
GBC Films Group laminators require minimal maintenance. However, regular maintenance is essential to keep any piece of precision machinery at peak performance. A maintenance schedule and a section of procedures are included in this section.
WARNING: Do not wear ties, loose fitting clothes or dangling jewelry while operating or servicing the laminator. These items can get caught in the nip and choke you or you can be crushed or burned.
INFORMATION: Improper maintenance can result in poor output quality.
ELECTRICAL HAZARD: Remove power from the laminator before cleaning. You can be severely shocked, killed or cause a fire.
1.Use a damp ( use water only to dampen the cloth ) white terry cloth towel to wipe dust from the cabinets, cover and stand.
7.2 Rollers
CAUTION: Never clean the rollers with sharp or pointed objects. You may put irreparable cuts into the rollers.
GBC offers Cleaning kits ( P/N 1711515 ) as well as Extended Maintenance Agreements.
The only maintenance required by the operator is to maintain clean and adhesive free nip rollers and overall cleanliness of the laminator itself.
INFORMATION: Power is required to rotate the rollers which means heat will be present as well.
7.2.1 Stains/ dust on rollers
ELECTRICAL HAZARD: Do not use liquid or aerosol cleaners on the laminator. Do not spill liquid of any kind on the laminator. You can be severely shocked, killed or cause a fire. Use only a damp cloth for cleaning unless other wise specified.
CAUTION: The following procedure is performed while the laminator is HOT! Use extreme caution!
© 2004 General Binding Corporation | Page |