Epson 220 manual Printer Specifications, Optional Interface Cards, Mechanical, Model number Name

EPSON LQ-2080

Optional Interface Cards

You can install an optional interface card to supplement your printer’s built-in parallel interface and provide added network compatibility. The EPSON interface cards in the table below are compatible with your printer. (Not all interfaces are available in all countries.)

Model number	Name
C82305✽ / C82306✽	Serial interface card
C82307✽ / C82308✽	32KB intelligent serial interface card
C82310✽ / C82311✽	32KB intelligent parallel interface card
C82312✽	LocalTalk interface card
C82313✽	32KB IEEE-488 interface card
C82314✽	Coax interface card
C82315✽	Twinax interface card
C82345✽	IEEE-1284 parallel interface card
C82357✽ / C82362✽ /	Ethernet interface card
C82364✽

The asterisk (✽) is a substitute for the last digit, which varies by country.

Printer Specifications

Mechanical

Printing method	24-pin impact dot matrix
Printing speed	High-speed draft
	400 cps at 10 cpi maximum
	Draft
	300 cps at 10 cpi
	Letter-quality
	100 cps at 10 cpi
Printing direction	Bidirectional logic seeking for text and
	graphics printing. Unidirectional text
	or graphics printing can be selected
	using software commands.
Line spacing	1/6-inch or programmable in
	1/360-inch increments
Printable columns	136 columns (at 10 cpi)
Resolution	Maximum
	360 × 180 dpi (letter quality)
	360 × 360 dpi (raster graphics)

Interfaces	One standard bidirectional, 8-bit,
	parallel interface with IEEE 1284
	nibble mode support and one optional
	interface slot
Paper feed methods	Friction (front or top paper entry)
	Push tractor (front or rear paper entry)
	Pull tractor (optional—front, bottom,
	or rear paper entry)
	Push and pull tractor (optional)
	Cut-sheet feeder (optional)
	Roll paper holder (optional)
Paper feed speed	Continuous
	5 inches/second
	Intermittent
	45 ms/line at 1/6-inch line spacing
Paper capacity	High-capacity cut-sheet feeder
	up to 150 sheets of 22 lb
	(82 g/m2) paper
	up to 25 plain or bond envelopes
	up to 30 airmail envelopes
	up to 30 postcards
	a stack of multipart forms up to
	0.59 inch (15 mm) thick

Note:

The thickness of the paper stack can be up to 0.59 inch (15 mm).

Second-bin cut-sheet feeder up to 150 sheets of 22 lb (82 g/m2) paper

Note:

The thickness of the paper stack can be up to 0.20 inch (5 mm).

Buffer	64KB or 0KB (selectable in the
	default-setting mode or the EPSON
	Remote! utility)

2 - EPSON LQ-2080 2/99