Epson 220 manual Paper Alignment, Printable Area

Page 5

EPSON LQ-2080

Paper Alignment

Front entry

Printing starts at the arrow mark. The unprintable area is to the left of the arrow mark.

Rear entry

Printing starts at “0” on the scale. The unprintable area is to the left of the “0.”

Printable Area

Single sheets, envelopes, and postcards

AB

 

A

printable

B

area

printable

area

 

B

A

A

 

AThe minimum top and bottom margins are 0.17 inch (4.2 mm).

BThe minimum left and right margins are 0.12 inch (3 mm). The maximum width is 16.0 inches (406 mm).

The maximum printable width is 13.6 inches (345 mm).

For paper wider than 13.8 inches (351 mm), the side margins increase to match the width of the paper.

Continuous paper

printable area

A

A

printable area

B

B

AThe minimum top and bottom margins (above and below the perforation) are 0.17 inch (4.2 mm).

BThe minimum left and right margins are 0.51 inch (13 mm). The maximum width is 16.0 inches (406 mm).

The maximum printable width is 13.6 inches (345 mm).

For paper wider than 14.6 inches (371 mm), the side margins increase to match the width of the paper.

2/99

EPSON LQ-2080 - 5

Image 5
Contents Paper Handling Options User Replaceable PartsOptions Optional Interface Cards Printer SpecificationsMechanical Model number NamePaper ElectricalEnvironmental Postcards Front and top entry Envelopes top entry onlyContinuous paper with labels front and bottom entry Roll paper Rear entry with optional roll paper holder onlyPrintable Area Paper AlignmentCE Marking Safety ApprovalsControl Panel Buttons and Lights Error Indicators Available Paper Paths Status MonitorPaper Positions Using the push and pull tractors in combination Using a pull tractor optionalPaper slot Description Combination DescriptionPrinting on Single Sheets Paper Release Lever PositionsLoading paper in the top slot Loading paper in the front slotPaper Handling Paper Thickness Lever PositionsLoading Multipart Forms Loading Continuous Paper with LabelsRemoving continuous paper with labels Using the Front Push Tractor optionalInstalling the tractor in the front push position Loading paper onto the front push tractor Removing the printed document from the front push tractor Loading paper onto the rear push tractor Using the Rear Push TractorRemoving the front push tractor Front of the printer Removing the printed document from the rear push tractor Using the Tractor in the Pull PositionInstalling the tractor in the pull position Loading paper onto the pull tractor Attach the printer cover and close the paper guide cover Removing paper from the pull tractor Using two tractors in a push and pull combinationRemoving the pull tractor Switching to printing on single sheetsSwitching to printing on continuous paper Advancing the Paper to the Tear-Off Edge Adjusting the Top-of-Form PositionAdvancing paper to the tear-off position automatically Using the Tear Off/Bin buttonAdjusting the tear-off position Separator Ribbon-tightening knob Installing the Ribbon CartridgeClearing Paper Jams Your Printer’s Default SettingsSettings Options Aligning Vertical Lines in Your Printout Changing Default SettingsPrinting a Hex Dump Printing a Self TestRelated Documentation Cleaning the PrinterTransporting the Printer