Epson 220 manual Envelopes top entry only, Postcards Front and top entry

Page 4

EPSON LQ-2080

Thickness

0.0025 to 0.0055 inch (0.065 to 0.14 mm)

Weight

14 to 24 lb (52 to 90 g/m2)

Single-sheet multipart forms:

front, top, and cut-sheet feeder entry

Width

Front and top

 

3.9 to 16.5 inches (100 to 420 mm)

 

High-capacity cut-sheet feeder

 

3.9 to 11.7 inches (100 to 297 mm)

Length

Front

 

5.8 to 16.5 inches (148 to 420 mm)

 

Top

 

3.9 to 16.5 inches (100 to 420 mm)

 

High-capacity cut-sheet feeder

 

3.9 to 11.7 inches (100 to 297 mm)

Copies

1 original + up to 4 copies

Thickness

0.0047 to 0.015 inch (0.12 to 0.39 mm)

Weight

12 to 15 lb (40 to 58 g/m2)

Binding

Line glue at the top of form

 

(both front and top entry)

 

Single side line glue (front entry only)

Envelopes: top entry only

Size

No. 6: 6.5 × 3.6 inches (165 × 92 mm)

 

No. 10: 9.5 × 4.1 inches (241 × 105 mm)

Thickness

0.0063 to 0.0205 inch (0.16 to 0.52 mm)

Weight

12 to 24 lb (45 to 90 g/m2)

Postcards:

front and top entry

Width

3.9 to 5.8 inches (100 to 148 mm)

Length

Front

 

5.8 inches (148 mm)

 

Top

 

3.9 to 5.8 inches (100 to 148 mm)

Thickness

0.0087 inch (0.22 mm)

Weight

51 lb (192 g/m2)

Continuous paper (standard and multipart): front, rear, and bottom entry

Width

4.0 to 16.0 inches (101 to 406 mm)

Length

4.0 to 22.0 inches (101 to 558 mm)

Copies

1 original + up to 4 copies

Thickness

Printable area

 

0.0025 to 0.015 inch (0.065 to 0.39 mm)

 

Perforated edges

 

up to 0.035 inch (0.9 mm)

Weight (not multipart)

14 to 22 lb (52 to 82 g/m2)

Weight (one sheet of multipart)

12 to 15 lb (40 to 58 g/m2)

Binding

Point glue or paper staples on both sides

 

(front, bottom, or rear entry)

Note:

Because thick multipart forms require a straight paper path, load them in the front slot.

Continuous paper with labels: front and bottom entry

Label size (minimum)

0.938 × 2.5 inches (23.8 × 63.5 mm)

0.1 inch (2.5 mm) corner radius

Backing sheet width

4.0 to 16.0 inches (101 to 406 mm)

Backing sheet length (one page)

4.0 to 22.0 inches (101 to 558 mm)

Backing sheet thickness

0.0028 to 0.0035 inch (0.07 to 0.09 mm)

Total thickness

0.0063 to 0.0075 inch (0.16 to 0.19 mm)

Label weight 17 lb (68 g/m2)

Roll paper:

rear entry with optional roll paper holder only

Width

8.5 ± 0.12 inch (216 ± 3 mm)

Thickness

0.0028 to 0.0035 inch (0.07 to 0.09 mm)

Weight

14 to 22 lb (52 to 82 g/m2)

4 - EPSON LQ-2080

2/99

Image 4
Contents Options User Replaceable PartsPaper Handling Options Printer Specifications Optional Interface CardsMechanical Model number NameEnvironmental ElectricalPaper Envelopes top entry only Postcards Front and top entryContinuous paper with labels front and bottom entry Roll paper Rear entry with optional roll paper holder onlyPaper Alignment Printable AreaControl Panel Buttons and Lights Safety ApprovalsCE Marking Error Indicators Paper Positions Status MonitorAvailable Paper Paths Using a pull tractor optional Using the push and pull tractors in combinationPaper slot Description Combination DescriptionPaper Release Lever Positions Printing on Single SheetsLoading paper in the top slot Loading paper in the front slotPaper Thickness Lever Positions Paper HandlingLoading Multipart Forms Loading Continuous Paper with LabelsInstalling the tractor in the front push position Using the Front Push Tractor optionalRemoving continuous paper with labels Loading paper onto the front push tractor Removing the printed document from the front push tractor Removing the front push tractor Using the Rear Push TractorLoading paper onto the rear push tractor Front of the printer Installing the tractor in the pull position Using the Tractor in the Pull PositionRemoving the printed document from the rear push tractor Loading paper onto the pull tractor Attach the printer cover and close the paper guide cover Using two tractors in a push and pull combination Removing paper from the pull tractorSwitching to printing on continuous paper Switching to printing on single sheetsRemoving the pull tractor Adjusting the Top-of-Form Position Advancing the Paper to the Tear-Off EdgeAdjusting the tear-off position Using the Tear Off/Bin buttonAdvancing paper to the tear-off position automatically Installing the Ribbon Cartridge Separator Ribbon-tightening knobSettings Options Your Printer’s Default SettingsClearing Paper Jams Changing Default Settings Aligning Vertical Lines in Your PrintoutPrinting a Self Test Printing a Hex DumpTransporting the Printer Cleaning the PrinterRelated Documentation