Epson Stylus 777 Testing the Printer, Printing on Special Media, Select this Media Type

Page 5

EPSON Stylus Color 777/777i

4.Unwrap the ink cartridges, then remove only the yellow part of the tape seal on top. Don’t pull off the blue part.

black cartridge

color cartridge

5.Tilt each cartridge forward slightly as you lower it into its holder. Hang the tabs on the back of the ink cartridges on the hoods on the holder clamps.

Don’t place the cartridges under the holder clamp hooks; you may damage the clamp when you close it.

Testing the Printer

You can run a printer check to determine whether a problem comes from the printer itself or some other source.

1.Make sure both the printer and computer are turned off.

2.Disconnect the interface cable from the printer.

3.Make sure letter-size or larger paper is loaded in the printer.

4. Hold down the maintenance button, then press and release the power button. Continue holding down the maintenance button until the power light starts to

flash, then release it.

The printer prints one page showing its ROM version number, ink counter, and a nozzle check pattern. (If the pattern has gaps in its dots, you need to clean the print head; see page 8.)

5.To end the check, turn off the printer after it prints the check page. Then reconnect the interface cable and turn on your printer and computer.

If the check page prints, the problem probably lies in your software settings, the interface cable, or your computer.

If the check page doesn’t print, you may have a problem with your printer. Try the suggestions in the Printer Basics book. If nothing seems to work, contact your dealer or EPSON.

6.

Close the ink cartridge clamps.

7.

Press the

ink cartridge replacement button to begin

 

charging the ink delivery system, then close the printer

 

cover.

 

8.

Charging takes about two minutes. the power light

 

flashes and the printer makes various sounds until it’s

 

finished. Don’t turn off the printer or interrupt charging or

 

it will start over, using more ink than necessary. Charging is

 

finished when the power light stops flashing and stays on.

Printing on Special Media

Whether you print on plain paper or special media, you need to select the Media Type setting according to the guidelines in the table below.

 

Select this Media Type

For this paper name...

setting

 

 

Plain paper and envelopes

Plain paper

 

 

EPSON 360 dpi Ink Jet Paper

360 dpi Ink Jet Paper

EPSON Iron-On Cool Peel Transfer Paper

 

 

 

EPSON High Quality Ink Jet Paper

Photo Quality Ink Jet Paper

EPSON Photo Quality Ink Jet Paper

 

EPSON Photo Quality Ink Jet Cards

 

EPSON Photo Quality Self Adhesive

 

Sheets

 

 

 

EPSON Photo Quality Glossy Paper

Photo Paper

EPSON Photo Paper

 

EPSON Glossy Photo Greeting Cards

 

 

 

EPSON Premium Glossy Photo Paper

Premium Glossy Photo

 

Paper

 

 

EPSON Photo Quality Glossy Film

Photo Quality Glossy Film

EPSON Photo Stickers

 

 

 

EPSON Ink Jet Transparencies

Ink Jet Transparencies

 

 

Matte Paper - Heavyweight

Matte Paper - Heavyweight

 

 

8/00

EPSON Stylus Color 777/777i - 5

Image 5
Contents Printer Specifications AccessoriesInk Cartridges MediaPaper Paper type Size Paper types Thickness WeightMechanical Safety ApprovalsElectrical EnvironmentalControl Panel Installing Ink Cartridges for the First TimeFor this paper name Setting Testing the PrinterPrinting on Special Media Select this Media TypeAdditional Media Loading Guidelines Replacing an Ink CartridgeLoad this number For this paper name SheetsDetermining Which Cartridge to Replace Ink Cartridge PrecautionsRemoving and Installing Ink Cartridges Printer makes some noise and the power light flashes Cleaning the Print HeadExamining the Nozzle Check Pattern Cleaning the PrinterAligning the Print Head Related Documentation Transporting the Printer