Epson Stylus 777i Ink Cartridge Precautions, Determining Which Cartridge to Replace

Page 7

EPSON Stylus Color 777/777i

Before you replace a cartridge, be sure to read these sections below:

“Ink Cartridge Precautions” below

“Determining Which Cartridge to Replace”

Ink Cartridge Precautions

Follow these precautions and those listed in the Printer Basics book before handling ink cartridges:

Keep ink cartridges out of the reach of children and do not drink the ink.

If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them thoroughly with water.

To avoid damaging the printer, never move the print head by hand.

You cannot print if either ink cartridge is empty. Leave the empty cartridge installed in the printer until you have obtained a replacement. Otherwise the ink remaining in the print head nozzles may dry out.

You must remove the yellow tape from the top of the cartridge or you will permanently damage it. Don’t try to remove the clear seal underneath the cartridge.

Don’t touch the green circuit board on the back of the cartridge; you may inhibit normal operation and printing.

Determining Which Cartridge to Replace

To find out which ink cartridge is low or empty, do one of the following:

Check the information in the EPSON Status Monitor 3 (Windows) or EPSON StatusMonitor (Macintosh) window that automatically appears on your screen when you print.

Press the ink cartridge replacement button and check the flash pattern of the control panel lights:

error and power lights flash at the same speed =

 

replace black cartridge

error light flashes twice as fast as the power

 

light = replace color cartridge

Removing and Installing Ink Cartridges

Be sure you have a new ink cartridge before you begin. Once you start the ink cartridge replacement procedure, you must complete all the steps in one session.

Follow these steps to replace ink cartridges:

1. Make sure the printer is turned on and not printing (the power light should be on, but not flashing), then open

the printer cover.

2. Press the ink cartridge replacement button. The print head moves to the center and the power light flashes and the error light flashes or remains on. (If you need to determine which cartridge to replace, check the status monitor window or the control panel light pattern now, as described above.)

3.The color cartridge is on the right and the black is on the left. Pull up the ink cartridge clamp. The cartridge rises up from its holder.

4.Lift the cartridge out of the printer and dispose of it carefully.

5.Unwrap the new ink cartridge. Then remove only the yellow tape seal on top.

black cartridge

color cartridge

8/00

EPSON Stylus Color 777/777i - 7

Image 7
Contents Media AccessoriesPrinter Specifications Ink CartridgesPaper Paper type Size Paper types Thickness WeightEnvironmental Safety ApprovalsMechanical ElectricalControl Panel Installing Ink Cartridges for the First TimeSelect this Media Type Testing the PrinterFor this paper name Setting Printing on Special MediaFor this paper name Sheets Replacing an Ink CartridgeAdditional Media Loading Guidelines Load this numberRemoving and Installing Ink Cartridges Ink Cartridge PrecautionsDetermining Which Cartridge to Replace Printer makes some noise and the power light flashes Cleaning the Print HeadAligning the Print Head Cleaning the PrinterExamining the Nozzle Check Pattern Related Documentation Transporting the Printer