•Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product from printing.
•Do not carry the product by its control panel; this may damage the product.
1.Turn off the product.
2.Lift up the scanner unit and check to see if the print head is in the far right position (the home position). If not, turn on the product, wait for the print head to move, then turn the product off again.
3.Secure the ink cartridge holder to the case with tape.
Caution: Do not place tape on the white flat cable inside the product; otherwise, you may damage your product.
4.Lower the scanner unit.
5.Remove all the paper from the product.
6.Remove any memory cards inserted in the product.
7.Unplug the power cable.
8.Disconnect any connected cables.