3.Click the Maintenance tab.
4.Click the Extended Settings button.
5.Select Enable EPSON Status Monitor 3, then click OK.
6.Click the Monitoring Preferences button.
7.Click the checkbox for the option that adds the shortcut icon to the taskbar.
8.Click OK to close the open program windows.
Parent topic: Solving Problems Printing from a Computer
Error After Cartridge Replacement
If you see an error light or error message after you replace an ink cartridge, follow these steps:
1.Make sure the print head is in the ink cartridge replacement position. (The ink cartridge holder should be beneath the cutout in the product case.)
Note: If the print head is not in the ink cartridge replacement position, follow the instructions on replacing an ink cartridge in this manual to move it.
2.Remove and reinsert the replaced ink cartridge, making sure to push it all the way into its slot.
3.Complete the ink cartridge installation steps.
Parent topic: Solving Problems Printing from a Computer
Related tasks
Removing and Installing Ink Cartridges
Printing is Slow
If printing becomes slow, try these solutions:
•Make sure your system meets the requirements for your operating system. If you are printing a high- resolution image, you may need more than the minimum requirements. If necessary, increase your system's memory.
•If you are using Windows 7, close the Devices and Printers window before you print.
•Make sure Quiet Mode is turned off.
•Clear space on your hard drive or run a defragmentation utility to free up existing space.
•Close any programs you are not using when you print.
•If your product is connected to a USB hub, connect it directly to your computer instead.
227