Cleaning the Print Head Using the Operator Panel
If you want to clean the print head from the operator panel, follow these steps:
Make sure | ❍ Make sure the green POWER light is on. |
the printer is |
|
turned on. |
|
Press and hold the | ❍ The POWER light will blink for several seconds while the |
RESUME button | print head is being cleaned. |
for at least two |
|
seconds until |
|
the printer |
|
beeps twice. |
|
POWER LIGHT
N❍ Perform the print head cleaning only when you encounter a print quality problem. Unnecessary and repetitious cleaning will waste ink.
❍If you execute the print head cleaning while paper is manually loaded, the printer will eject the paper and then perform the cleaning.
Maintaining the Printer
Chapter 4 | Maintaining the Printer |