Canon 900D manual An Error Message is Displayed While Using the Photo Viewer, Try This

Page 48
An Error Message is Displayed While Using the Photo Viewer

An Error Message is Displayed While Using the Photo Viewer

If one of the following messages appears while using the Photo Viewer, printing may be disabled or the Photo Viewer may be forced to terminate.

Error Message

Try This

 

 

Executing maintenance.

Printing cannot be done in the maintenance mode.

 

 

Insert a memory card.

Insert a memory card after checking its orientation.

 

See “Using a Memory Card” on page 7.

 

If a memory card has already been inserted, remove it and then insert it again. Next,

 

check that the Indicator lamp stays on.

 

 

The printer’s card slot has been

The memory card utility started on the computer has write-enabled the card slot.

write-enabled

When the card slot is write-enabled, the printer cannot print images.

 

When you have finished writing data to the card, cancel the write-enable mode. For

 

the cancellation procedure, see “Setting up the Card Slot as the Memory Card Drive

 

of the Computer” on page 31.

 

 

There is a problem with the

• The memory card is inserted incorrectly.

memory card or it is not inserted.

Insert the memory card after checking its orientation. See “Using a Memory Card”

......

on page 7.

 

If a memory card has already been inserted, remove it and then insert it again.

 

Next, check that the Indicator lamp stays on.

 

• The memory card cannot be read.

 

Image data edited/processed on the computer must also be printed from the

 

computer.

 

 

Insufficient disk space

The hard disk of the computer does not have a sufficient free space.

 

Delete unnecessary files on the hard disk to create sufficient free space, then start

 

the Photo Viewer again.

 

 

Insufficient memory

The computer does not have sufficient free memory. Close some applications or

 

increase memory, then start the Photo Viewer again.

 

 

A digital camera is connected to

Printing from a computer or the operation panel cannot be done when a digital

the printer

camera or digital video camcorder is connected to the printer.

 

After completion of operation from the digital camera, disconnect the connection

 

cable.

 

 

Failed to communicate with the

The computer cannot communicate with the printer.

printer

Check whether the cable is connected securely between the printer and computer.

 

Turn the printer off and on again, then start the Photo Viewer again.

 

 

Failed to print

An unexpected error occurred during printing.

 

Turn the printer off and on again.

 

 

An internal error (code = nnnn)

An internal error occurred.

occurred

Turn the printer off and on again, then start the Photo Viewer again.

(n: Alphanumeric character)

If the same error persists, reboot the computer and then start the Photo Viewer

 

again.

 

 

47

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Series Photo Printer Direct Printing Guide Contents ContentsPrinting Flow Using a Memory Card Printing Maintenance2 Power Lamp 5 Settings ButtonOperation Panel and Menu Display Operation Panel Names and Functions12 Cancel Button 14 Indicator Lamp9 Buttons 10 Photo Viewer ButtonHead cleaning Deep cleaningMenu Displays Print allPrinting Flow Step 1 Turn on the Printer Step 2 Load the paperStep 3 Insert the memory card Step 5 Change/Confirm Print Settings and Start Printing Change the SettingsStep 4 Selecting the Print Mode Using a Memory Card Memory Cards Supported by this printerInserting a Memory Card 3 Install the memory card in the card slot 1 Turn on the printer 2 Open the card slot coverRemoving a Memory Card 4 Confirm the settings Printing PhotographPrinting an Image Displayed on the LCD Turn on the printer and Load the Paper5 Change the settings 6 Start printingLoading Paper „ Print Media to Avoid„ Loading the Print Media 1 Turn on the printer3 Preparing to Load Paper 4 Loading the PaperLoad Limit Mark „ Media Types for Card Direct Printing Media TypePaper Rest Load Paper SizePrinting Images from a Memory Card Specifying how many copies to print for each image„ Specifying the number of copies to print for each image 1 Prepare to print„ Printing a specified area - Trimming 3 Specify the number of copies to print4 Start printing 1 Set the Trimming Mode 2 Trimming and Rotating the Sections you wish to Print3 Finalize the trimmed area Printing all images 3 Start printingPrinting an Image List - Print Index Specifying the layout z Borderedz Borderless z Postcard3 Specify the layout 4 Select the image to print5 Start printing 2 Using the buttons to specify the number of copies to printPrinting According to the Settings Made on the Camera - DPOF Printing 1 Turn on the printer and load the paper2 Set the DPOF mode „ Settings Menu Display Specifying the Paper and Optimizing Images„ How to Make Settings „ Other Setting Items2 Finalize the Settings 1 Select an item to set„ Borderless Printing Borderless„ Date „ Print QualityDigital Camera Setting Printing Photographs Directly from a Digital CameraMedia Types for Digital Camera 4 Start printing using the print function of the digital camera Printing from a Digital CameraEnsure that the printer is turned on Load the paper 3 Connect the digital camera and the printerPrint quality setting Maintenance 1 Display the image you want to print in the Replay mode2 Press the SET button to display the Print menu z You can make the following prints directly from a digital cameraUsing Photo Viewer 3 Choose print settings and start printingOther Useful Functions Ensure that the printer and the computer are turned on4 Exit the Photo Viewer Notes Changing the Display ModeThe Photo Viewer is terminated in the following case Setting up the Card Slot as the Memory Card Drive of the Computer Open the USB memory card setup windowThe USB Memory Card Settings window appears The Read/write attribute setting window appearsTurn on the printer Select Maintenance from the Menu Changing the Language DisplayedStart the BJ Utility Adjusting Contrast of the LCD 3 Select a language for display3 Select Contrast Reducing the Sound of Printer Operation 3 Select Quiet modeKnowing When to Replace an Ink Tank When Low Ink is DetectedReplacing an Ink Tank 3 Prepare a replacement tank Replacing Ink Tanks1 Ensure that the printer is on, and then open the front cover 2 Remove the empty ink tank4 Install the ink tank 5 Close the front coverPrinting Maintenance When Printing Becomes Faint or Colors are IncorrectStep1 Step2Printing the Nozzle Check Pattern Examining the Nozzle Check PatternPrinting the nozzle check pattern Print Head Cleaning Ensure that the printer is on Print Head CleaningAfter print head cleaning finishes Print Head Deep Cleaning Ensure that the printer is on Print Head Deep CleaningNote When Automatic Print Head Aligning Cannot Execute Correctly Aligning Print Head - Auto head alignAlign the print head automatically Troubleshooting A Message is Displayed on the LCDMessage Try ThisNote Adjusting the Print Head Manually If the Same Error Persists„ Printed Surface is Scratched Possible CauseNote If the printed surface is still scratched „ Cannot Print Properly from the Digital Camera An Error Message is Displayed While Using the Photo Viewer Error MessageIndex Read/write mode Read-only modeSmartMedia Card 7, 8
Top Page Image Contents