Canon iR2870, ir3570, ir4570, iR3530, iR2270, iR2230 manual Auto Continue, Job Securing Time

Auto Continue

On, Off*

This setting enables you to automatically clear an error and continue printing when an error occurs (Error skip).

If [On] is selected, error skips are performed automatically.

If [Off] is selected, you must perform error skips from the touch panel display.

NOTE

•To perform an error skip, press [Print] on the System Monitor screen ➞ select the job containing the error ➞ press [Details] ➞ [Error Skip].

•Error skip only temporarily clears an error, so the data may not print correctly.

•For information on types of errors that can be temporarily cleared with Auto Continue, see "When a Message Is Displayed," on p. 3-2 .

•This setting is valid even if multiple errors have occurred.

Job Securing Time

1 hour*, 2 hours, 3 hours, 6 hours, 12 hours, and 24 hours

When a secured print job is sent to the machine, it is stored on the machine's hard disk, and a password must be entered before the job can be printed. This setting specifies how long the job will be stored before it is automatically cancelled.

NOTE

•Even if the time period specified with this setting has not elapsed, the print job data is deleted if the main power to the machine is switched OFF.

•The password is set from the printer driver.

2

Printer Settings Menu

Settings Menu 2-13