Canon QY8-13A9-000, IP4200 service manual Repair, After replacement, At replacement

Page 17

3. REPAIR

3-1. Notes on Service Part Replacement (and Disassembling / Reassembling)

Service part

Logic board ass'y QM2-2670

Notes on replacement*1

-Before removal of the logic board ass'y, remove the power cord, and allow for approx. 1 minute (for discharge of capacitor's accumulated charges), to prevent damages to the logic board ass'y.

-Before replacement, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or more, also replace the ink absorber kit when replacing the logic board ass'y.

[See 3-3. Adjustment / Settings, (5) Service mode, for details.]

Adjustment / settings

After replacement:

1.Initialize the EEPROM.

2.Reset the waste ink counter.

3.Set the destination in the

EEPROM.

4.Correct the CD / DVD and automatic print head alignment sensors.

5.Check the ink system function.

[See 3-3. Adjustment / Settings, (5) Service mode, for details of 1 to 5]

6.Perform the print head alignment in the user mode.

Operation check

-EEPROM information print

-Service test print

-Printing via USB connection

-Direct printing from a digital camera

Ink absorber kit QY5-0146

After replacement:

1.Reset the waste ink counter.

[See 3.3. Adjustment / Settings, (5) Service mode.]

- Service test print

- EEPROM information

print

Carriage unit

QM2-2207

Paper feed motor QK1-1502

Platen unit: QM2- 2202

-The red screws securing the paper feed motor are allowed to be loosened. (DO NOT loosen any other red screws.)

-By attaching the tape at the specified 2 locations,

At replacement:

1.Apply grease to the sliding portions.

[See 3-3. Adjustment / Settings, (2) Grease application.]

After replacement:

1.Correct the CD / DVD and automatic print head alignment sensors.

[See 3.3. Adjustment / Settings, (5) Service mode.]

2.Check the ink system function.

[See 3.3. Adjustment / Settings, (5) Service

mode.]

3.Perform the print head alignment in the user mode.

At replacement:

1.Adjust the paper feed motor.

[See 3-3. Adjustment / Settings, (1) Paper feed motor adjustment.]

At replacement:

1-12

- Service test print

(Confirm CD / DVD and

automatic print head

alignment sensor

correction, and ink

system function.)

After the printer unit is assembled in the bottom

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Revision ScopeTrademarks CopyrightManual Outline II. Table of Contents Part Adjustment MaintenancePeriodic maintenance Customer MaintenancePeriodic replacement parts Replacement consumablesPrinter Product LifePrint head Ink tank target valueSerial Number Location Part 1 1. MaintenanceSpecial Tools Operator Call Errors by Alarm LED Blinking in Orange List of Error Display / IndicationPage Paper Feed Motor QK1-1502 See -3. Adjustment / Settings, 5 Service mode, for details Printer no LED indications Troubleshooting by SymptomPage Part 1 2. List of Error Display / Indication Repair After replacementAt replacement Upon contact with the film After replacement Service test printPart 1 3. Repair External cover removal Special Notes on Repair ServicingFlexible cable and harness wiring, connection Printer unit and bottom case unit assembly To the top Grease application Adjustment / SettingsPaper feed motor adjustment Page Part 1 3. REPAIR, 3-3 1 to User mode Waste ink counter settingPrint sample Service modePage Part 1 3. REPAIR, 3-3 3 to Verification Items Service test printPrint sample Eeprom information printPrinted items HdeepromPart 1 4. Printer Transportation Printer TransportationTechnical Reference NEW Technologies Cleaning Mode and Amount of INK Purged Part 2 2. Cleaning Mode and Amount of INK Purged Normal color printing Grayscale printing Print ModeResolution Borderless printing Duplex printing Camera Direct printing Part 2 3. Print ModeFAQ Problems Specific to the iP4200 and Corrective Actions Cleaning by user SolutionService TemporaryPage Page Page Part 2 4. FAQ Appendix Pixma iP4200 Block DiagramPart 3 1. Block Diagram CN101 Not used CN201 Print head 1/2 Carriage unit Connector Location and PIN LayoutLogic Board Assy CN202 Print head 2/2 Carriage unit CN302 USB I/F CN301 AC adapterCN303 DSC harness CN401 CR lift sensor harnessCN408 Maincam / Cdrg CN403 Operation panel assyCN404 PE sensor / LF encoder harness CN501 Motor multi harness Part 3 2. Connector Location and PIN LayoutCarriage Board Print Head Connector Romsk Pixma iP4200 Specifications Supported ink tanks Pixma iP4000 Specifications
Related manuals
Manual 6 pages 57.09 Kb Manual 6 pages 50.69 Kb

QY8-13A9-000, IP4200 specifications

The Canon IP4200 is a versatile and reliable inkjet printer that has garnered attention for its excellent performance and user-friendly features. Targeted primarily at home and small office users, this printer combines functionality, quality, and affordability into one compact design.

One of the standout features of the IP4200 is its impressive print resolution. With a maximum resolution of 4800 x 1200 dpi, this printer is capable of producing high-quality prints that exhibit sharp details and vibrant colors. This makes it an excellent choice for printing photographs, as well as everyday documents.

The Canon IP4200 employs Canon's advanced FINE (Full-photolithography Inkjet Nozzle Engineering) technology, which allows for precise ink placement and excellent uniformity in print quality. This technology works in conjunction with Canon's dye-based and pigment-based inks to ensure that images are both bright and durable. The printer's five-color individual ink system enables users to replace only the color that runs out, which not only saves costs but also reduces waste.

The IP4200 supports various paper types and sizes, ranging from standard letter and legal sizes to photo paper and specialty media such as labels and envelopes. With a dedicated photo tray, users can easily switch between printing documents and photos without the hassle of changing paper.

Another key feature of the Canon IP4200 is its impressive speed. The printer can produce black-and-white prints at speeds of up to 25 pages per minute and color prints at approximately 17 pages per minute. This efficiency makes it suitable for users who require quick printing without compromising on quality.

In terms of connectivity, the IP4200 offers USB support for easy connection to computers. It is compatible with various operating systems, including Windows and Mac, ensuring versatility for different users. The printer's compact design allows it to fit seamlessly into any workspace, taking up minimal desk space.

Overall, the Canon IP4200 stands as a hallmark of reliability and performance in the consumer inkjet market. With its high-quality prints, advanced ink technology, and user-friendly features, it remains a popular choice for anyone looking to achieve professional results from the comfort of their home or small office. Its excellent balance of speed and quality, along with its economical ink usage, make it a valuable investment for those who frequently print documents and photos.
Top Page Image Contents