1. MAINTENANCE
(1) Adjustment
Adjustment | Timing |
PurposeTool
Approx.
time
Destination | At logic board replacement |
settings |
|
(EEPROM |
|
settings) |
|
Waste ink | - At logic board replacement |
counter | - At waste ink absorber |
resetting | replacement |
(EEPROM |
|
settings) |
|
Paper feed | At paper feed motor |
motor position | replacement |
adjustment |
|
CD / DVD | - At logic board replacement |
detection sensor | - At carriage unit replacement |
light volume |
|
correction*1 |
|
Grease | - At carriage unit replacement |
application | - At PR shaft ass'y replacement |
| - At CL base / gear replacement |
Ink system | - At logic board replacement |
function check | - At platen unit replacement |
| - At carriage unit replacement |
To set the destination.
To reset the waste ink counter.
To adjust the belt tension. (Position the paper feed motor so
that the belt is stretched tight.)
To correct the light volume for the CD / DVD detection sensor.
-To maintain sliding properties of the carriage shaft and the lift cam shaft.
-To protect the printer's sliding portions (gears).
To maintain detection functionality for presence of the ink tanks and each ink tank position.
None.
Perform in the service mode.
None.
Perform in the service mode.
None.
None.
Perform in the service mode.
FLOIL KG-107A
None.
Perform in the service mode.
1 min.
1 min.
5min.
2min.
1min.
1 min.