Canon 3301B002 warranty Wireless Networks with a Single Access Point, Select printer to use

Page 19

Wireless Networks with a Single Access Point	3 Select LAN connection
	On the Canon IJ Network Tool dialog, select LAN connection, then
	click OK.

Wi-Fi router

4 Select printer to use

a Select Setup in the pop-up menu.

b Select MX860 series in the Printers pane, then click OK.

If your network has more than one wireless access point, go to page 23.

1Locate the name and password (if applicable) of your wireless network

Click the icon in the menu bar and write down the network name with the checkmark next to it.

2Make sure the MX860 is ready

Ensure the MX860 is connected to your computer with the USB cable and is powered on.

You will need the USB cable only for the initial network setup. Once your MX860 is connected to your network, the USB cable is no longer needed.

The MX860 is set at the factory to connect to a wireless (Wi-Fi) network. If your MX860 was previously set for a wired network, set the connection type now for a wireless network. See "Set the Network Connection Type" on page 28 for details.

prepare hardware softwarenetwork

19

Image 19

Contents Getting Started for Mac Users Page Contents Prepare Your MX860 Getting Started OverviewBefore Starting Check your box contents Unpack and Set UpRemove all packing materials Connect a phone or answering machine for fax setup Connect the phone line for fax setupConnect the power cord Select language Power upRaise the print head lock lever Set Up the HardwareInstall the Print Head With the power on, open the paper output trayLower the print head lever until it locks into place Unpackage the print headInsert the ink tank into the print head Install the Ink TanksUnwrap the first ink tank Remove protective capRemove the cassette Load PaperClose the cover Press the OK buttonSlide the cassette back in until it clicks into place Align the Print HeadSlide the guides to match the paper size Confirm paper stack does not exceed the limitSelect best pattern Look at the first printoutPress OK again to print the third pattern Set Up to Receive Faxes Set Up Your Fax Sender Information Set Up the SoftwareInstall the Software Double-click the Setup icon on your screen Insert the Setup disc Click Easy InstallClick OK Click RestartChoose Your Network Type Connect to Your Network optionalSelect printer to use Wireless Networks with a Single Access PointMake sure the MX860 is ready Complete the network setup Select your wireless networkClick Next Select the printer Review resultsClick Add Add the printer Select scanner Click AddWireless Networks with Multiple Airport Access Points Enter network name If settings are correct, click FinishClick Next Enter your network passphrase, then click Next Review results Add the Printer OS X Click Apply to use the MX860 as a scanner Set the Network Connection Type Wired NetworksCheck Wired LAN Connection reminder appears Connect the Ethernet cable Click Yes to close the Check Wired LAN Connection reminderDisconnect the USB cable, then click OK Add the Printer OS X Add the Printer OS X Connecting Additional Computers Click Cancel Printer Browser window opens. a Select MX860 series Select the Scanner Solution Menu Start Using Your MX860On-Screen Manual Getting Help from Canon