Canon Q T 1 0 8 5 1 V 0 1, 3301B002 warranty Select the Scanner

Page 36

The Canon IJ Network Scanner Selector dialog opens.

Select scanner

a From the pop-up menu, select Canon MX860 series Network.

b In the Network Device List pane, select the MAC address of the MX860.

There should be only one device listed unless you have more than one MX860 series device connected to your network.

c Click Apply to use the MX860 as a scanner.

d Confirm that a checkmark appears next to the selected device, then click Exit.

Congratulations! You are finished with the setup.

Go to "Start Using Your MX860!" on page 37.

Select the Scanner

1

36

Image 36

Contents Getting Started for Mac Users Page Contents Getting Started Overview Prepare Your MX860Before Starting Unpack and Set Up Check your box contentsRemove all packing materials Connect the phone line for fax setup Connect a phone or answering machine for fax setupConnect the power cord Power up Select languageSet Up the Hardware Install the Print HeadWith the power on, open the paper output tray Raise the print head lock leverUnpackage the print head Lower the print head lever until it locks into placeInstall the Ink Tanks Unwrap the first ink tankRemove protective cap Insert the ink tank into the print headLoad Paper Close the coverPress the OK button Remove the cassetteAlign the Print Head Slide the guides to match the paper sizeConfirm paper stack does not exceed the limit Slide the cassette back in until it clicks into placeLook at the first printout Select best patternPress OK again to print the third pattern Set Up to Receive Faxes Set Up the Software Set Up Your Fax Sender InformationInstall the Software Insert the Setup disc Click Easy Install Double-click the Setup icon on your screenClick Restart Click OKConnect to Your Network optional Choose Your Network TypeWireless Networks with a Single Access Point Select printer to useMake sure the MX860 is ready Select your wireless network Complete the network setupClick Next Review results Select the printerClick Add Add the printer Click Add Select scannerWireless Networks with Multiple Airport Access Points If settings are correct, click Finish Enter network nameClick Next Enter your network passphrase, then click Next Review results Add the Printer OS X Click Apply to use the MX860 as a scanner Wired Networks Set the Network Connection TypeCheck Wired LAN Connection reminder appears Click Yes to close the Check Wired LAN Connection reminder Connect the Ethernet cableDisconnect the USB cable, then click OK Add the Printer OS X Add the Printer OS X Connecting Additional Computers Click Cancel Printer Browser window opens. a Select MX860 series Select the Scanner Start Using Your MX860 Solution MenuOn-Screen Manual Getting Help from Canon