Canon 3301B002, Q T 1 0 8 5 1 V 0 1 warranty Connecting Additional Computers

Page 33

The Canon IJ Network Scanner Selector dialog opens.

Select scanner

a From the pop-up menu, select Canon MX860 series Network.

b In the Network Device List pane, select the MAC address of the MX860.

There should be only one device listed unless you have more than one MX860 series device connected to your network.

c Click Apply to use the MX860 as a scanner.

d Confirm that a checkmark appears next to the selected device, then click Exit.

Congratulations! You are finished with the setup.

Go to "Start Using Your MX860!" on page 37.

Select the Scanner

1

Connecting Additional Computers

More than one networked computer can print to your MX860. Follow the instructions in this section if one computer has already been setup to use your MX860 on a network. (See "Connect to Your Network (optional)" on page 18.)

A USB cable is not required for connecting additional networked computers to your MX860.

1Make sure the MX860 is on and connected to your wireless or wired network

2Install the software on the additional computer

a Follow the software installation steps in "Set Up the Software" on page 15.

b After installing the software and restarting your computer, the Canon IJ Network Tool automatically starts.

3Select LAN connection

On the Canon IJ Network Tool dialog, select LAN connection, then click OK.

prepare hardware softwarenetwork

33

Image 33

Contents Getting Started for Mac Users Page Contents Getting Started Overview Prepare Your MX860Before Starting Unpack and Set Up Check your box contentsRemove all packing materials Connect the phone line for fax setup Connect a phone or answering machine for fax setupConnect the power cord Select language Power upInstall the Print Head Set Up the HardwareWith the power on, open the paper output tray Raise the print head lock leverLower the print head lever until it locks into place Unpackage the print headUnwrap the first ink tank Install the Ink TanksRemove protective cap Insert the ink tank into the print headClose the cover Load PaperPress the OK button Remove the cassetteSlide the guides to match the paper size Align the Print HeadConfirm paper stack does not exceed the limit Slide the cassette back in until it clicks into placeLook at the first printout Select best patternPress OK again to print the third pattern Set Up to Receive Faxes Set Up the Software Set Up Your Fax Sender InformationInstall the Software Double-click the Setup icon on your screen Insert the Setup disc Click Easy InstallClick OK Click RestartChoose Your Network Type Connect to Your Network optionalWireless Networks with a Single Access Point Select printer to useMake sure the MX860 is ready Select your wireless network Complete the network setupClick Next Review results Select the printerClick Add Add the printer Select scanner Click AddWireless Networks with Multiple Airport Access Points If settings are correct, click Finish Enter network nameClick Next Enter your network passphrase, then click Next Review results Add the Printer OS X Click Apply to use the MX860 as a scanner Set the Network Connection Type Wired NetworksCheck Wired LAN Connection reminder appears Connect the Ethernet cable Click Yes to close the Check Wired LAN Connection reminderDisconnect the USB cable, then click OK Add the Printer OS X Add the Printer OS X Connecting Additional Computers Click Cancel Printer Browser window opens. a Select MX860 series Select the Scanner Start Using Your MX860 Solution MenuOn-Screen Manual Getting Help from Canon