AT&T 518-600-016 manual Wiring the System

●

●

●

See the equipment supplier to obtain the correct adapters for the system.

Z122C apparatus boxes. Each box holds six single- port voice terminaI connectors.

Modular wall jack adapters. These adapters (or connecting blocks) terminate the wiring runs at the voice terminal locations. Various adapters (e.g., the 102A, 103A, 104A, 104B, 105AF, and 106AFD) are used to connect eight-conductor jacks to 110-type hardware. See the equipment supplier to obtain the correct adapters for the system.

Blue labels. These labels come in perforated sheets with the installation kit for the apparatus boxes.

The recommended cable for the wiring runs is spooled DIW. If you choose to use spooled cable for the wiring runs, use cutdown-to-modjack adapters in place of modjack-to-modjack adapters in the apparatus boxes. The procedure “Terminating the Wiring Runs in Modular Wall Jacks” on page 2-39 shows how to connect wires to cutdown-to-modjack adapters.

The following tools and equipment may be needed to complete the wiring installation. What you need depends mostly on the layout, dimensions, and structural particular of the installation site.

●

●

●

●

●

●

Cable termination tool

Scissors

Drill and bits

Screwdriver

Cable ties and clips

Stapler and staples

2-36 Wiring the System