ADDING A VOICE TERMINAL
4If all line jacks in the control unit are full, you can add any combination of line modules m the system so long as the sum total of outside lines does not exceed 56.
Contact an equipment supplier to order additional line modules.
Add each new line module, if necessary, according to the instructions in the procedure, “Module Installation” on page
5Readminister the system so that it recognizes the newly added lines. Refer the information under “Administering Lines” on page
NOTE: Depending on the system configuration, you may want to assign the new line to an appropriate pool or assign the line to a new line button on one or more voice terminals. See the appropriate entry in Section
3, "Administration" for instructions on assigning lines to pools or voice terminals.
6Record the new information on the
The MERLIN II System can have up to 120 station jacks, which accommodate up to 120 voice terminals. Eight of these must be analog jacks; 112 can be a combination of analog, basic, or digital jacks. The Simultaneous Voice and Data feature and the Voice Announcement to Busy Voice Terminal feature reduce the total number of voice
Modifying the System
