>To program a switchhook flash at the beginning of a programmed dialing sequence, press Recall and then press Hold.
>To program
6 Leave programming mode by sliding the T/P switch to the center position.
NOTE: Digital phones: Dial #00.
Last Number Redial A Last Number Redial button allows the user to redial with one much the number dialed last. The user does not need to do anything to save the number. To program a Last Number Redial button, follow these steps:
1Label a button.
2Enter programming mode by sliding the T/P switch to
P .
NOTE: Digital phones: Dial #33.
3Press the button you want to program.
4Dial ✱ 73 (you do not need to dial an Outside number).
5Leave programming mode by sliding the T/P switch to the center position.
NOTE: Digital phones: Dial #00.
Saved Number Redial With a Saved Number Redial button, a user can save the number just dialed to be dialed later with one touch. The user saves the number by pressing a button before he or she hangs up. Later, they press the Saved Number button again, and the phone automatically redials the last number saved. To program a Saved Number Redial button, follow these steps:
