AT&T 518-600-016 manual Installing the Top Cover

Installing the Top Cover

To install the top cover, see Figure 2-28and follow these steps:

1Be sure the cords have been pressed through the wire managers at the base of the modules.

2Install the empty module that came with the system in the rightmost slot of the carrier if it is lacking a functional module in this slot. This empty module helps to support the top cover.

3Hold the top cover so that the hooks are facing you.

4Engage the tabs at the rear of the top cover with the carrier.

5Lower the top cover so that the legs lock into the vents on the modules.

2-108 Testing the System