AT&T 518-600-016 manual Hold Disconnect

TABLE 3-5 Display Console Administration (continued)

		Procedure: Slide T/P switch to P, press Conference button
Feature		twice, then follow steps for feature
Hold Disconnect	1 Press [Lines], [More], [HidAband] .
lnterval	2 Press line buttons:
		Steady green on = line drops held call on long (450 millisecond)
		signal (default)
		Green off = line drops held call on short (50 millisecond) signal
	3	Press Conference to return to the administration menu.
Intercom Dial Tone	1 Press [More], [Opitions], [More], [More], [More], [ICMdial] .
	2	Press either [Internl] to provide the MERLIN II system intercom
		dial tone, or [Externl] to provide CO line dial tone.
	3	Press Conference to return to the administration menu.
Labels for Lines	1 Press [More], [More], [Label], [Lines] .
	2 Enter the line number or press the line button.
	3	Press [Enter] .
	4 Use Backspace or Drop to remove the current entry.
	5 Enter the label (up to 7 characters).
	6	Press [Next] to enter a label for the next line in sequence or
		press [Enter] .
	7 Press Conference to return to administration menu.
Labels for Stations	1 Press [More], [More], [Label] .
	2 Press [Stations] .
	3	Enter the station number or the Auto Intercom button.
	4	Press [Enter] .
	5 Use Backspace or Drop to remove the current entry.
	6 Enter the label for the station (up to seven characters).
	7	Press [Next] to enter a label for the next station in sequenence or
		press [Enter] .
	8 Press Conference to return to the administration menu

Optional Features 3-85