AT&T 518-600-016 Press Message Dial #204, Press the line button until your selection is shown

With a BIS-34D Console

1Enter administration mode by sliding the T/P switch to P.

2 Press Conference twice.

Lights flash next to Adm Tel, Adm Pool, Message, and Speaker.

3Press Message.

4Dial #204.

Green light nex t o Message goes on steady and two beeps sound.

Press the line button until your selection is shown:

Green light on = jack is assigned for Music-on-Hold

Green light off = jack is for a standard line or loudspeaker page

IDENTIFING LOUDSPEAKER PAGE LINE JACK

5Press Message.

6Continue administration or leave administration mode by sliding the T/P switch to the center position.

Check Form 1e, System Form-Requirements and Options for Release 3, or the Line Jack section of the Master Planning Form for Feature Module 2 to see if the system includes the Loudspeaker Page feature. If so, you need to identify the control until line jack to which the paging equipment will be connected. Keep in mind that the Loudspeaker Page line can’t be placed in a line pool, used for Music-on-Hold, or used as a DISA line.

Perform the appropriate procedure below to identify the Loudspeaker Page line jack.

With a Display Console

1 Enter administration mode by sliding the T/P switch to P.

2 Press Conference twice.

The administration menu appears.

3-46 Administering a New System