AT&T 518-600-016 manual With a BIS-34D.Console, Dial the appropriate number = square

3Press [System], [Type] .

4Press the appropriate button:

>For a square system, press [Square] .

>For a pooled system, press one of the following:

[ButnAcc], [ARS], [DialAcc] .

> For a behind switch system, press [More], [BehindSw] .

The message "System is Re-starting..." appears, followed by the

administration menu.

5Press Conference to return to the administration menu or leave administration mode by sliding the T/P switch to the center position.

With a BIS-34D.Console

1Enter administration mode by sliding the T/P switch to P .

2Press Conference twice.

Lights flash next to Adm Tel, Adm Pool, Message, and Speaker.

3Press Message.

The green light goes on steady next to Message. All flashing lights go off.

4 Dial #202.

Two beeps Sound.

5 Dial the appropriate number

0 = square

1 = pooled with Button Access to line pools

2 = pooled with Dial Acess to line pools.

3 = pooled with Automatic Route Selection

4 = behind switch

Lights flash next to Adm Tel, Adm Pool, Message and Speaker.

6Press Conference to return to the administration menu or leave administration mode by sliding the T/P switch to the center position.

Administering a Changed System 3-67