>If no jack field is used to connect the CO lines to the network interface, connect new CO lines
directly to the appropriate jacks on the line modules.
See “Testing Outside Lines” on page
9 Connect any new station wiring as follows as appropriate:
>Connect new station wiring runs to their appropriate jacks in the jack field if one has been used. Connect the jacks in the jack field to the proper station ports on the station modules.
>If no jack field is used, connect the station wiring
runs to their appropriate station ports on the station modules.
See “Testing the System” on page
10 Connect any new stations to their wiring runs. See “Connecting the Voice Terminals” on page
11 Add a printer to the control unit if needed. See “Connecting a Printer to the Control Unit" on page
12 Add new adjunct equipment as needed. See “Adding Accessories" on page
13 Power up the system turning on the Expansion Carrier first, any Auxiliary Power Units next and the Basic Carrier last.
Turn to ‘Administering an Upgraded System” on page
Upgrading an Existing System
