3 Press [More], [Options], [XtrnPg].
4The system prompts you to press the appropriate line button to identify the line jack used for Loudspeaker Page. Each successive press of a button gives you one
of the following codes:
Green light on = Loudspeaker Page line
Green light off = standard line or
5 Press Conference to return m the administration menu or leave administration mode by sliding the T/P switch to the center position.
With a BIS-34D Console
1Enter administration mode by sliding the T/P switch to P.
2Press Conference twice.
Lights flash next to Adm TeI, Adm Pool, Message, and Speaker.
3Press Message.
4Dial #205.
The green light goes on steady next to Message and two beeps sound.
5 Press the appropriate line button. Each successive press gives you one of the following:
Green light on = jack is assigned for Loudspeaker Page
Green light off = standard line jack or
6Press Message.
7Continue administration or leave administration mode by sliding the T/P switch to the center position.
Administering a New System
