With a Display Console
1Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3Press [Stations], [Line/Pool].
4Press the Auto Intercom button or dial the code for the
station
5Press [Enter] .
6Press the the buttons until your selection is shown. For
Green light on = line is assigned to the station
Green light off= line is not assigned to the station
Red light on = line is assigned to a pool
If you want to give another station the same line assignments as one you have already set up, use the following shortcut:
CAUTION: Be aware that when you copy line assignments, you also copy call restrictions, allowed list, and disallowed list permissions. Be sure you want the two stations to be identical in these respects before using this copy procedure.
aPress [Copy] .
bIn response to the prompt, press the Auto Intercom
button or dial the code of the station you are copying from.
cPress [Enter] .
dIn response to the prompt, press the Auto Intercom
button or dial the code of the station you are copying to.
