AT&T 518-600-016 manual Press More, More, Print, DialPlan

DIAL PLAN PRINTOUT

first station or line and instruct the system to renumber the other stations or lines in the group sequentially.

You can get a printout of the numbers currently assigned to stations, lines, line pools, Call Distribution and Group Page groups. Having these numbers on hand is useful as you administer flexible numbering to be sure that the numbers you’re assigning do not conflict with numbers already assigned, To get a printout from the administration menu, follow these steps:

With a Display Console

1 Enter administration mode by sliding the T/P switch to

P.

2 Press Conference twice.

The administration menu appears.

Press [More], [More], [Print], [DialPlan]

Wait until printing is complete before leaving administration mode. Don’t remove the printout until after you’ve left administration mode or printing page alignments will be affected.

4 Press Conference to return to the administration menu or leave administration mode by sliding the T/P switch to the center position.

With a BIS-34D Console

1Enter administration on mode by sliding the T/P switch to P.

2Press Conference twice.

Lights flash next to Adm Tel, Adm Pool, Message, and Speaker.

3Press Message.

4Dial #999 and wait for the beep.

Administering a New System 3-27