you want to designate a new attendant position and the system already has the maximum number, you must change an existing attendant position to a nonattendant voice terminal before you designate the new attendant position.
With a Display Console
1Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3Press [System], [Attendnts].
4Press [Position].
5Press the Auto Intercom buttons of the stations you
want to designate as attendant positions until their green lights show the appropriate code:
Slteady green light = attendant position
Flashing green iight = potential attendant position used as nonattendant voice terminal
Green light off = cannot be assigned as attendant position
6Press [Store].
The message "System is
7Continue administration or leave administration mode by sliding the T/P switch to the center position.
With a
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
Lights flash next to Adm Tel, Adm Pool, Message, and Speaker.
3 Press Message.
Light goes on steady next to Message. Flashing lights go off.
