AT&T 518-600-016 S c r i b e d b e l o w, Two buttons in the leftmost column take on special

	If you have a MERLIN II System Display Console with
	more than 40 stations in the system, some labels will have
	two entries. Write the lower intercom number on the top
	half of the button label and the higher intercom number on
	the bottom half. Likewise, on a BIS-34D console, leave
	room below “Intercom-Voice” and "Intercom-Ring" since
	these buttons have another function for administration as
	d e s c r i b e d b e l o w .
Administration Mode	The MERLIN II System Display Console has an overlay
Overlay	that is placed on the console during system administration.
	lf you have a BIS-34D Console, a separate overlay is not
	used during administration. However, because the bottom
	two buttons in the leftmost column take on special
	functions in administration mode, you should place a
	second entry on the labels for those buttons. Under
	“Intercom-Ring,” write or type, “Adm Tel.” Under
	“Intercom-Voice,” write or type, “Adm Pool.” You may
	want to record the administration function labels in a
	different color than the call-handling function labels.
	NOTE: Although the Message and Conference buttons
	take on different functions during administration,
	those functions are not labeled on the buttons.
LABELS FOR	For attendant consoles other than at Station 10 and for all
ATTENDANT	the voice terminals and basic telephones in the system
CONSOLES AND	refer to the completed Station Configuration Forms. Copy
VOICE TERMINALS	the information from the forms onto the appropriate labels.
	NOTE: If you label buttons with the names of
	programmable features, be sure to assign the
	features from the attendant console using
	Centralized Programming, or notify the users that
	they should program those features themselves.

3-14 Before Administering a System