Verify Intercom Number
LABELING EACH VOICE TERMINAL
5 Lift the handset.
Red and green lights are on and a dial tone is present.
6 Touch one or more dial pad buttons.
The dial tone stops.
7 Hang up the handset.
The green light goes out.
If the voice terminal does not respond as described, make a note of the problem and refer to Section 4, "Troubleshooting."
Verify the voice terminal’s intercom number as follows:
1Using a working voice terminal, touch Intercom (fifth button down in the leftmost column).
2Lift the handset or press Speakerphone
3Dial the intercom number you want to verify.
If the voice terminal with the intercom number you dialed rings, you have verified the intercom number.
NOTE: If you dial an intercom number that is not assigned or in use, you will hear a busy signal.
As you test the voice terminals, label each one with its intercom number as follows:
1Find the intercom number labels that came with the voice terminal and fill in an intercom number label for each voice terminal.
2Pry the plastic number card retainer from its position below the handset rest.
3Lay the intercom number label in the recess, and replace the plastic retainer.
