AT&T 518-600-016 manual Tie Line Troubleshooting

6Print out the tie line translation and make sure that the ports are configured as described in step 4.

>If the tie lines are translated correctly, go on to step 7.

If the tie lines are not translated correctly according to Form 1b, repeat steps 4 through 6. If the tie lines still aren’t translated correctly, call the National Service Assistance Center (NSAC) at 1-800-628-2888 for help.

7Remove the bridging clips and connect the tie line ports to the network interface (a 66-type connecting block).

8From the 66-type block, cross-connect tie line port 1 to one of the ports you want to test (ports 2, 3, or 4). See Figure 4-2.

NOTE: Test only one port at a time.

4-12 Tie Line Troubleshooting