AT&T 518-600-016 manual Removing a Module

●

●

“Installing a Tie Line Module” on page 2-80, “Installing a Basic Telephone Module” on page 2-81.

1.Lower module onto rod on carrier

2 Swing in

FIGURE 2-15 Installing a module on the carrier.

REMOVING A MODULE

To remove a module, refer to Figure 2-16and follow these steps:

1Press up on the release tab on the bottom of the module.

2Pull the module away from the carrier.

3Disengage the module from the rod on the carrier.

2-64 Installing the Control Unit