AT&T 518-600-016 manual Tel

TABLE 3-6 BIS-34D Console Administration (continued)

F e a t u r e		Procedure: Slide T/P switch to P, press Conference
		button twice, then follow steps for feature
Call Restrictions (continued)
2 To assign call	4 Press Speaker until the green light shows the restrictions
		wanted:
restrictions to phones
(continued)		Steady green light on = all calls permitted (unrestricted )
		Flashing green light = local and intercom calls and calls to
		numbers on assigned lists
		permitted toll call restriction
		Green light off = intercom calls and calls to numbers on
		assigned lists permitted (outward
		call restriction)
	5	Press Speaker.
	6	Press Adm Tel
To copy line assignments	1	Press Adm Tel.
and call restriction	2	Press Auto Intercom button for new phone.
assignments from one
	3
phone to another		If a steady green light goes on next to the Auto Intercom
		button and you hear two beeps, go on to step 4. If not, wait
		for 2-beep signal or try again later.
	4	Press Recall.
	5 Press Auto intercom button for phone whose assignments
		you want to copy.
	6	When red light next to Adm Tel stops flashing, touch Adm
		—
		Tel
Camp On Return Interval	1 Press Message.
	2 Dial #326.
	3 Dial number of minutes (1 through 5) before transferred calls
		return to originator.
	4 Press Message.

Optional Features 3-99