4The system prompts you to assign voice/voice pairs of
jacks by pressing the appropriate Auto Intercom buttons. Each successive press of a button gives you one of the following codes:
Green light on = station jack is in a voice/voice pair
Green light off = station jack is not paired
5 Press Conference to return to the administration menu or leave administmtion mode by sliding the T/P switch to the center position.
With a
1Enter administration mode by sliding the T/P switch to P.
2Press Conference twice.
Lights flash next to Adm Tel, Adm Pool, Message, and Speaker.
3Press Message.
4Dial #210.
Green light goes on steady next to Message and two beeps sound.
5Press either one of two adjacent Auto Intercom buttons until your selection is shown:
Green light on = station jack is in voice/voice pair
Green light of = station jack is not paired
6Press Message.
7Press Conference to return to the administration menu or leave administration mode by sliding the T/P switch to the center position.
