PRINTING THE INWARD DIAL PLAN
1 Enter Administration mode by sliding the T/P switch to
P.
2 Press Conference twice.
The administration menu appears.
3 Press [More], [More], [More], [TieLines], [More], [More]. [More], [InDPin] .
The inward dial plan screen appears.
4 Press [Block] .
5Press [Stations] .
6Dial the first (lowest numbered) new dial code.
7 Press [Enter] .
The system renumbers all the stations sequentially, then returns
you to the block renumber screen.
8 Press Conference to return to the main administration menu, or leave administration mode by sliding the T/P switch to the center.
To get a printout of the inward dial plan, follow these s t e p s :
1Enter administration mode by sliding the T/P switch to P.
2Press Conference twice.
The administration menu appears.
3Press [More], [More], [Print], [More], [More], [More],
[More], [InDPin] .
Wait until printing is complete before leaving administration mode. Don’t remove the printout until after you’ve left administration mode or printing page alignments will be affected.
4Press Conference to return to the main administration menu, or leave administration mode by sliding the T/P switch to the center position.
