AT&T 518-600-016 manual Press Exit if you do not want to change the setting. o r

SELECTING THE INWARD DIAL PLAN

FLEXIBLE RENUMBERING OF THE DIAL PLAN

The Inward Dial Plan, that is, the numbers that other people use to call in to the business on tie lines, can have either three or four digits. This option is set for all the tie lines installed and does not need to be administered to individual lines. To change the number of digits people use to dial into the MERLIN II system on tie lines, follow these steps:

1Enter administration mode by sliding the T/P switch to P.

2 Press Conference twice.

The administration menu appears.

3Press [More], [More], [More], [TieLines], [More], [More]. [More], [InDigt] .

The inward digit screen appears showing current setting.

4Press [Exit] if you do not want to change the setting. o r

Press [Drop] or [Bksp] to remove the old setting.

5Use the dial pad to dial the number of digits, either 3 or 4 (default is 4), for the inward dial plan.

6Press [Enter] .

7Press Conference to return to the main administration menu, or leave administration mode by sliding the T/P

switch to the center position.

The default tie line inward dial plan provides 4-digit numbers, 4010 through 4097. These numbers parallel the default intercom numbers between intercom numbers 10 and 69. The tie line dial plan number continue consecutively while the intercom numbers leap from 69 to 700 before continuing consecutively. Form 2c, Flexible Numbering Form-Tie Line Inward Dial Plan shows the relationship between the default dial plan numbers and default intercom numbers and station jack numbers.

Administering a New System 3-59