AT&T 518-600-016 manual Press Store, Dial #203

5 Press the appropriate Auto Intercom buttons until the green lights show the code you wan

Steady green light = attendant position

Flashing green light = potential attendant position used as nonattendant voice terminal

Green light off = cannot be assigned as attendant position

6Press [Store] .

The message “System is Re-starting...” appears. When the process is complete after a short delay, the administration menu appears.

7Press Conference to return to the administration menu or leave administration mode by sliding the T/P switch to the center position.

With a B1S-34D Console

1Enter administration mode by sliding the T/P switch to P.

2Press Conference twice.

Lights flash next to Adm Tel, Adm Pool, Message, and Speaker.

3Press Message.

Light goes on steady next to Message. Flashing lights go off.

4Dial #203.

TwO beeps sound.

5 Press the Auto Intercom button for the appropriate selection:

Steady green light = attendant position

Flashing green light = potential attendant position

Green light off = cannot be assigned as an attendant position

6 Press #.

After a short delay, lights flash to Adm Tel, Adm Pool, Message, and Speaker.

7Continue administration or leave administration mode by sliding the T/P switch to the center position.

Administering a Changed System 3-69