AT&T 518-600-016 manual Group Paging To assign phones to Press Message

TABLE 3-6 BIS-34D Console Administration (continued)

Feature	Procedure: Slide T/P switch to P, press Conference
	button twice, then follow steps for feature
Group Paging
To assign phones to	1 Press Message.
groups for Group Page	2 Dial #.
	3 Dial default Group page group number (881 through 886).
	4 Press Auto lntercom buttom(s):
	Steady green light on = phone in paging group
	Green light off = phone not in paging group
	5 Press Message.
To get a printout of	1 Press Message.
paging groups	2 Dial #903 and wait for beep.
	3 Press Message.
	.
Hold Disconnect Interval	1 Press Message.
	2 Dial #303.
	3 Touch each line button to change its disconnect interval.
	Steady green on = line drops held call on long (450
	millisecond) signal (default)
	Green off = line drops held call on short (50 millisecond)
	signal
	4 Press Message.
Intercom Dial Tone	1 Press Message.
	2 Dial #335.
	3 Press 0 to provide MERLIN II system intercom dial tone.
	or
	Press 1 to provide CO line dial tone.
	4 Press Message.

Optional Features 3-103